conversion script does not replace Method.hpp

Submitted by Tinne De Laet on Fri, 2010-10-22 08:56

Hi,

Just to report that after converting my components from 1.10 to 2.0
the #include <rtt/Method.hp

is not replaced, causing a compile
error.

Tinne

‹ Sequence not resized when reading and writing to propertyfile bootstrap_toolchain should be wonderfull but ... ›
»

conversion script does not replace Method.hpp

Submitted by Tinne De Laet on Fri, 2010-10-22 13:04.

Hi,

Just to report that after converting my components from 1.10 to 2.0
the #include <rtt/Method.hp

is not replaced, causing a compile
error.

Tinne

»

conversion script does not replace Method.hpp

Submitted by Tinne De Laet on Fri, 2010-10-22 15:16.

Hi,

Just to report that after converting my components from 1.10 to 2.0
the #include <rtt/Method.hp

is not replaced, causing a compile
error.

Tinne

»

conversion script does not replace Method.hpp

Submitted by Tinne De Laet on Fri, 2010-10-22 20:40.

Hi,

Just to report that after converting my components from 1.10 to 2.0
the #include <rtt/Method.hp

is not replaced, causing a compile
error.

Tinne

»

conversion script does not replace Method.hpp

Submitted by peter on Fri, 2010-10-22 11:40.

On Friday 22 October 2010 10:46:24 Tinne De Laet wrote:
> On Fri, Oct 22, 2010 at 10:44, Tinne De Laet
>
> <tinne [dot] delaet [..] ...> wrote:
> > Hi,
> >
> > Just to report that after converting my components from 1.10 to 2.0
> > the #include <rtt/Method.hp

is not replaced, causing a compile
> > error.

Which version are you using ? You should use the 1.2 version of the tool

>
> I also not removes rtt/RealTimeTookit.hpp.

That was probably overlooked

Peter

»

conversion script does not replace Method.hpp

Submitted by Tinne De Laet on Sat, 2010-10-23 19:56.

Hi,

Just to report that after converting my components from 1.10 to 2.0
the #include <rtt/Method.hp

is not replaced, causing a compile
error.

Tinne

»

conversion script does not replace Method.hpp

Submitted by Tinne De Laet on Fri, 2010-10-22 19:52.

Hi,

Just to report that after converting my components from 1.10 to 2.0
the #include <rtt/Method.hp

is not replaced, causing a compile
error.

Tinne

»

conversion script does not replace Method.hpp

Submitted by peter on Fri, 2010-10-22 11:00.

On Friday 22 October 2010 10:46:24 Tinne De Laet wrote:
> On Fri, Oct 22, 2010 at 10:44, Tinne De Laet
>
> <tinne [dot] delaet [..] ...> wrote:
> > Hi,
> >
> > Just to report that after converting my components from 1.10 to 2.0
> > the #include <rtt/Method.hp

is not replaced, causing a compile
> > error.

Which version are you using ? You should use the 1.2 version of the tool

>
> I also not removes rtt/RealTimeTookit.hpp.

That was probably overlooked

Peter

»

conversion script does not replace Method.hpp

Submitted by peter on Fri, 2010-10-22 10:20.

On Friday 22 October 2010 10:46:24 Tinne De Laet wrote:
> On Fri, Oct 22, 2010 at 10:44, Tinne De Laet
>
> <tinne [dot] delaet [..] ...> wrote:
> > Hi,
> >
> > Just to report that after converting my components from 1.10 to 2.0
> > the #include <rtt/Method.hp

is not replaced, causing a compile
> > error.

Which version are you using ? You should use the 1.2 version of the tool

>
> I also not removes rtt/RealTimeTookit.hpp.

That was probably overlooked

Peter

»

conversion script does not replace Method.hpp

Submitted by peter on Fri, 2010-10-22 09:36.

On Friday 22 October 2010 10:46:24 Tinne De Laet wrote:
> On Fri, Oct 22, 2010 at 10:44, Tinne De Laet
>
> <tinne [dot] delaet [..] ...> wrote:
> > Hi,
> >
> > Just to report that after converting my components from 1.10 to 2.0
> > the #include <rtt/Method.hp

is not replaced, causing a compile
> > error.

Which version are you using ? You should use the 1.2 version of the tool

>
> I also not removes rtt/RealTimeTookit.hpp.

That was probably overlooked

Peter

»

conversion script does not replace Method.hpp

Submitted by peter on Sun, 2010-10-24 09:56.

On Friday 22 October 2010 10:58:57 Peter Soetens wrote:
> On Friday 22 October 2010 10:46:24 Tinne De Laet wrote:
> > On Fri, Oct 22, 2010 at 10:44, Tinne De Laet
> >
> > <tinne [dot] delaet [..] ...> wrote:
> > > Hi,
> > >
> > > Just to report that after converting my components from 1.10 to 2.0
> > > the #include <rtt/Method.hp

is not replaced, causing a compile
> > > error.
>
> Which version are you using ? You should use the 1.2 version of the tool

Typo: 1.1 version, released on Oct 12.

Peter

»

conversion script does not replace Method.hpp

Submitted by peter on Sun, 2010-10-24 09:00.

On Friday 22 October 2010 10:58:57 Peter Soetens wrote:
> On Friday 22 October 2010 10:46:24 Tinne De Laet wrote:
> > On Fri, Oct 22, 2010 at 10:44, Tinne De Laet
> >
> > <tinne [dot] delaet [..] ...> wrote:
> > > Hi,
> > >
> > > Just to report that after converting my components from 1.10 to 2.0
> > > the #include <rtt/Method.hp

is not replaced, causing a compile
> > > error.
>
> Which version are you using ? You should use the 1.2 version of the tool

Typo: 1.1 version, released on Oct 12.

Peter

»

conversion script does not replace Method.hpp

Submitted by peter on Sun, 2010-10-24 08:04.

On Friday 22 October 2010 10:58:57 Peter Soetens wrote:
> On Friday 22 October 2010 10:46:24 Tinne De Laet wrote:
> > On Fri, Oct 22, 2010 at 10:44, Tinne De Laet
> >
> > <tinne [dot] delaet [..] ...> wrote:
> > > Hi,
> > >
> > > Just to report that after converting my components from 1.10 to 2.0
> > > the #include <rtt/Method.hp

is not replaced, causing a compile
> > > error.
>
> Which version are you using ? You should use the 1.2 version of the tool

Typo: 1.1 version, released on Oct 12.

Peter

»

conversion script does not replace Method.hpp

Submitted by peter on Sun, 2010-10-24 07:08.

On Friday 22 October 2010 10:58:57 Peter Soetens wrote:
> On Friday 22 October 2010 10:46:24 Tinne De Laet wrote:
> > On Fri, Oct 22, 2010 at 10:44, Tinne De Laet
> >
> > <tinne [dot] delaet [..] ...> wrote:
> > > Hi,
> > >
> > > Just to report that after converting my components from 1.10 to 2.0
> > > the #include <rtt/Method.hp

is not replaced, causing a compile
> > > error.
>
> Which version are you using ? You should use the 1.2 version of the tool

Typo: 1.1 version, released on Oct 12.

Peter

»

conversion script does not replace Method.hpp

Submitted by peter on Sun, 2010-10-24 06:12.

On Friday 22 October 2010 10:58:57 Peter Soetens wrote:
> On Friday 22 October 2010 10:46:24 Tinne De Laet wrote:
> > On Fri, Oct 22, 2010 at 10:44, Tinne De Laet
> >
> > <tinne [dot] delaet [..] ...> wrote:
> > > Hi,
> > >
> > > Just to report that after converting my components from 1.10 to 2.0
> > > the #include <rtt/Method.hp

is not replaced, causing a compile
> > > error.
>
> Which version are you using ? You should use the 1.2 version of the tool

Typo: 1.1 version, released on Oct 12.

Peter

»

conversion script does not replace Method.hpp

Submitted by peter on Sun, 2010-10-24 05:16.

On Friday 22 October 2010 10:58:57 Peter Soetens wrote:
> On Friday 22 October 2010 10:46:24 Tinne De Laet wrote:
> > On Fri, Oct 22, 2010 at 10:44, Tinne De Laet
> >
> > <tinne [dot] delaet [..] ...> wrote:
> > > Hi,
> > >
> > > Just to report that after converting my components from 1.10 to 2.0
> > > the #include <rtt/Method.hp

is not replaced, causing a compile
> > > error.
>
> Which version are you using ? You should use the 1.2 version of the tool

Typo: 1.1 version, released on Oct 12.

Peter

»

conversion script does not replace Method.hpp

Submitted by peter on Sun, 2010-10-24 04:20.

On Friday 22 October 2010 10:58:57 Peter Soetens wrote:
> On Friday 22 October 2010 10:46:24 Tinne De Laet wrote:
> > On Fri, Oct 22, 2010 at 10:44, Tinne De Laet
> >
> > <tinne [dot] delaet [..] ...> wrote:
> > > Hi,
> > >
> > > Just to report that after converting my components from 1.10 to 2.0
> > > the #include <rtt/Method.hp

is not replaced, causing a compile
> > > error.
>
> Which version are you using ? You should use the 1.2 version of the tool

Typo: 1.1 version, released on Oct 12.

Peter

»

conversion script does not replace Method.hpp

Submitted by peter on Sun, 2010-10-24 03:24.

On Friday 22 October 2010 10:58:57 Peter Soetens wrote:
> On Friday 22 October 2010 10:46:24 Tinne De Laet wrote:
> > On Fri, Oct 22, 2010 at 10:44, Tinne De Laet
> >
> > <tinne [dot] delaet [..] ...> wrote:
> > > Hi,
> > >
> > > Just to report that after converting my components from 1.10 to 2.0
> > > the #include <rtt/Method.hp

is not replaced, causing a compile
> > > error.
>
> Which version are you using ? You should use the 1.2 version of the tool

Typo: 1.1 version, released on Oct 12.

Peter

»

conversion script does not replace Method.hpp

Submitted by peter on Sun, 2010-10-24 02:28.

On Friday 22 October 2010 10:58:57 Peter Soetens wrote:
> On Friday 22 October 2010 10:46:24 Tinne De Laet wrote:
> > On Fri, Oct 22, 2010 at 10:44, Tinne De Laet
> >
> > <tinne [dot] delaet [..] ...> wrote:
> > > Hi,
> > >
> > > Just to report that after converting my components from 1.10 to 2.0
> > > the #include <rtt/Method.hp

is not replaced, causing a compile
> > > error.
>
> Which version are you using ? You should use the 1.2 version of the tool

Typo: 1.1 version, released on Oct 12.

Peter

»

conversion script does not replace Method.hpp

Submitted by peter on Sun, 2010-10-24 01:32.

On Friday 22 October 2010 10:58:57 Peter Soetens wrote:
> On Friday 22 October 2010 10:46:24 Tinne De Laet wrote:
> > On Fri, Oct 22, 2010 at 10:44, Tinne De Laet
> >
> > <tinne [dot] delaet [..] ...> wrote:
> > > Hi,
> > >
> > > Just to report that after converting my components from 1.10 to 2.0
> > > the #include <rtt/Method.hp

is not replaced, causing a compile
> > > error.
>
> Which version are you using ? You should use the 1.2 version of the tool

Typo: 1.1 version, released on Oct 12.

Peter

»

conversion script does not replace Method.hpp

Submitted by peter on Sun, 2010-10-24 00:36.

On Friday 22 October 2010 10:58:57 Peter Soetens wrote:
> On Friday 22 October 2010 10:46:24 Tinne De Laet wrote:
> > On Fri, Oct 22, 2010 at 10:44, Tinne De Laet
> >
> > <tinne [dot] delaet [..] ...> wrote:
> > > Hi,
> > >
> > > Just to report that after converting my components from 1.10 to 2.0
> > > the #include <rtt/Method.hp

is not replaced, causing a compile
> > > error.
>
> Which version are you using ? You should use the 1.2 version of the tool

Typo: 1.1 version, released on Oct 12.

Peter

»

conversion script does not replace Method.hpp

Submitted by peter on Sat, 2010-10-23 23:40.

On Friday 22 October 2010 10:58:57 Peter Soetens wrote:
> On Friday 22 October 2010 10:46:24 Tinne De Laet wrote:
> > On Fri, Oct 22, 2010 at 10:44, Tinne De Laet
> >
> > <tinne [dot] delaet [..] ...> wrote:
> > > Hi,
> > >
> > > Just to report that after converting my components from 1.10 to 2.0
> > > the #include <rtt/Method.hp

is not replaced, causing a compile
> > > error.
>
> Which version are you using ? You should use the 1.2 version of the tool

Typo: 1.1 version, released on Oct 12.

Peter

»

conversion script does not replace Method.hpp

Submitted by peter on Sat, 2010-10-23 22:44.

On Friday 22 October 2010 10:58:57 Peter Soetens wrote:
> On Friday 22 October 2010 10:46:24 Tinne De Laet wrote:
> > On Fri, Oct 22, 2010 at 10:44, Tinne De Laet
> >
> > <tinne [dot] delaet [..] ...> wrote:
> > > Hi,
> > >
> > > Just to report that after converting my components from 1.10 to 2.0
> > > the #include <rtt/Method.hp

is not replaced, causing a compile
> > > error.
>
> Which version are you using ? You should use the 1.2 version of the tool

Typo: 1.1 version, released on Oct 12.

Peter

»

conversion script does not replace Method.hpp

Submitted by peter on Sat, 2010-10-23 21:48.

On Friday 22 October 2010 10:58:57 Peter Soetens wrote:
> On Friday 22 October 2010 10:46:24 Tinne De Laet wrote:
> > On Fri, Oct 22, 2010 at 10:44, Tinne De Laet
> >
> > <tinne [dot] delaet [..] ...> wrote:
> > > Hi,
> > >
> > > Just to report that after converting my components from 1.10 to 2.0
> > > the #include <rtt/Method.hp

is not replaced, causing a compile
> > > error.
>
> Which version are you using ? You should use the 1.2 version of the tool

Typo: 1.1 version, released on Oct 12.

Peter

»

conversion script does not replace Method.hpp

Submitted by peter on Sat, 2010-10-23 20:52.

On Friday 22 October 2010 10:58:57 Peter Soetens wrote:
> On Friday 22 October 2010 10:46:24 Tinne De Laet wrote:
> > On Fri, Oct 22, 2010 at 10:44, Tinne De Laet
> >
> > <tinne [dot] delaet [..] ...> wrote:
> > > Hi,
> > >
> > > Just to report that after converting my components from 1.10 to 2.0
> > > the #include <rtt/Method.hp

is not replaced, causing a compile
> > > error.
>
> Which version are you using ? You should use the 1.2 version of the tool

Typo: 1.1 version, released on Oct 12.

Peter

»

conversion script does not replace Method.hpp

Submitted by Tinne De Laet on Sat, 2010-10-23 23:40.

Hi,

Just to report that after converting my components from 1.10 to 2.0
the #include <rtt/Method.hp

is not replaced, causing a compile
error.

Tinne

»

conversion script does not replace Method.hpp

Submitted by peter on Sat, 2010-10-23 19:56.

On Friday 22 October 2010 10:58:57 Peter Soetens wrote:
> On Friday 22 October 2010 10:46:24 Tinne De Laet wrote:
> > On Fri, Oct 22, 2010 at 10:44, Tinne De Laet
> >
> > <tinne [dot] delaet [..] ...> wrote:
> > > Hi,
> > >
> > > Just to report that after converting my components from 1.10 to 2.0
> > > the #include <rtt/Method.hp

is not replaced, causing a compile
> > > error.
>
> Which version are you using ? You should use the 1.2 version of the tool

Typo: 1.1 version, released on Oct 12.

Peter

»

conversion script does not replace Method.hpp

Submitted by peter on Sat, 2010-10-23 19:00.

On Friday 22 October 2010 10:58:57 Peter Soetens wrote:
> On Friday 22 October 2010 10:46:24 Tinne De Laet wrote:
> > On Fri, Oct 22, 2010 at 10:44, Tinne De Laet
> >
> > <tinne [dot] delaet [..] ...> wrote:
> > > Hi,
> > >
> > > Just to report that after converting my components from 1.10 to 2.0
> > > the #include <rtt/Method.hp

is not replaced, causing a compile
> > > error.
>
> Which version are you using ? You should use the 1.2 version of the tool

Typo: 1.1 version, released on Oct 12.

Peter

»

conversion script does not replace Method.hpp

Submitted by peter on Sat, 2010-10-23 18:04.

On Friday 22 October 2010 10:58:57 Peter Soetens wrote:
> On Friday 22 October 2010 10:46:24 Tinne De Laet wrote:
> > On Fri, Oct 22, 2010 at 10:44, Tinne De Laet
> >
> > <tinne [dot] delaet [..] ...> wrote:
> > > Hi,
> > >
> > > Just to report that after converting my components from 1.10 to 2.0
> > > the #include <rtt/Method.hp

is not replaced, causing a compile
> > > error.
>
> Which version are you using ? You should use the 1.2 version of the tool

Typo: 1.1 version, released on Oct 12.

Peter

»

conversion script does not replace Method.hpp

Submitted by peter on Sat, 2010-10-23 17:08.

On Friday 22 October 2010 10:58:57 Peter Soetens wrote:
> On Friday 22 October 2010 10:46:24 Tinne De Laet wrote:
> > On Fri, Oct 22, 2010 at 10:44, Tinne De Laet
> >
> > <tinne [dot] delaet [..] ...> wrote:
> > > Hi,
> > >
> > > Just to report that after converting my components from 1.10 to 2.0
> > > the #include <rtt/Method.hp

is not replaced, causing a compile
> > > error.
>
> Which version are you using ? You should use the 1.2 version of the tool

Typo: 1.1 version, released on Oct 12.

Peter

»

conversion script does not replace Method.hpp

Submitted by peter on Sat, 2010-10-23 16:12.

On Friday 22 October 2010 10:58:57 Peter Soetens wrote:
> On Friday 22 October 2010 10:46:24 Tinne De Laet wrote:
> > On Fri, Oct 22, 2010 at 10:44, Tinne De Laet
> >
> > <tinne [dot] delaet [..] ...> wrote:
> > > Hi,
> > >
> > > Just to report that after converting my components from 1.10 to 2.0
> > > the #include <rtt/Method.hp

is not replaced, causing a compile
> > > error.
>
> Which version are you using ? You should use the 1.2 version of the tool

Typo: 1.1 version, released on Oct 12.

Peter

»

conversion script does not replace Method.hpp

Submitted by peter on Sat, 2010-10-23 15:16.

On Friday 22 October 2010 10:58:57 Peter Soetens wrote:
> On Friday 22 October 2010 10:46:24 Tinne De Laet wrote:
> > On Fri, Oct 22, 2010 at 10:44, Tinne De Laet
> >
> > <tinne [dot] delaet [..] ...> wrote:
> > > Hi,
> > >
> > > Just to report that after converting my components from 1.10 to 2.0
> > > the #include <rtt/Method.hp

is not replaced, causing a compile
> > > error.
>
> Which version are you using ? You should use the 1.2 version of the tool

Typo: 1.1 version, released on Oct 12.

Peter

»

conversion script does not replace Method.hpp

Submitted by peter on Sat, 2010-10-23 14:20.

On Friday 22 October 2010 10:58:57 Peter Soetens wrote:
> On Friday 22 October 2010 10:46:24 Tinne De Laet wrote:
> > On Fri, Oct 22, 2010 at 10:44, Tinne De Laet
> >
> > <tinne [dot] delaet [..] ...> wrote:
> > > Hi,
> > >
> > > Just to report that after converting my components from 1.10 to 2.0
> > > the #include <rtt/Method.hp

is not replaced, causing a compile
> > > error.
>
> Which version are you using ? You should use the 1.2 version of the tool

Typo: 1.1 version, released on Oct 12.

Peter

»

conversion script does not replace Method.hpp

Submitted by peter on Sat, 2010-10-23 13:24.

On Friday 22 October 2010 10:58:57 Peter Soetens wrote:
> On Friday 22 October 2010 10:46:24 Tinne De Laet wrote:
> > On Fri, Oct 22, 2010 at 10:44, Tinne De Laet
> >
> > <tinne [dot] delaet [..] ...> wrote:
> > > Hi,
> > >
> > > Just to report that after converting my components from 1.10 to 2.0
> > > the #include <rtt/Method.hp

is not replaced, causing a compile
> > > error.
>
> Which version are you using ? You should use the 1.2 version of the tool

Typo: 1.1 version, released on Oct 12.

Peter

»

conversion script does not replace Method.hpp

Submitted by peter on Sat, 2010-10-23 12:28.

On Friday 22 October 2010 10:58:57 Peter Soetens wrote:
> On Friday 22 October 2010 10:46:24 Tinne De Laet wrote:
> > On Fri, Oct 22, 2010 at 10:44, Tinne De Laet
> >
> > <tinne [dot] delaet [..] ...> wrote:
> > > Hi,
> > >
> > > Just to report that after converting my components from 1.10 to 2.0
> > > the #include <rtt/Method.hp

is not replaced, causing a compile
> > > error.
>
> Which version are you using ? You should use the 1.2 version of the tool

Typo: 1.1 version, released on Oct 12.

Peter

»

conversion script does not replace Method.hpp

Submitted by peter on Sat, 2010-10-23 11:32.

On Friday 22 October 2010 10:58:57 Peter Soetens wrote:
> On Friday 22 October 2010 10:46:24 Tinne De Laet wrote:
> > On Fri, Oct 22, 2010 at 10:44, Tinne De Laet
> >
> > <tinne [dot] delaet [..] ...> wrote:
> > > Hi,
> > >
> > > Just to report that after converting my components from 1.10 to 2.0
> > > the #include <rtt/Method.hp

is not replaced, causing a compile
> > > error.
>
> Which version are you using ? You should use the 1.2 version of the tool

Typo: 1.1 version, released on Oct 12.

Peter

»

conversion script does not replace Method.hpp

Submitted by peter on Sat, 2010-10-23 10:36.

On Friday 22 October 2010 10:58:57 Peter Soetens wrote:
> On Friday 22 October 2010 10:46:24 Tinne De Laet wrote:
> > On Fri, Oct 22, 2010 at 10:44, Tinne De Laet
> >
> > <tinne [dot] delaet [..] ...> wrote:
> > > Hi,
> > >
> > > Just to report that after converting my components from 1.10 to 2.0
> > > the #include <rtt/Method.hp

is not replaced, causing a compile
> > > error.
>
> Which version are you using ? You should use the 1.2 version of the tool

Typo: 1.1 version, released on Oct 12.

Peter

»

conversion script does not replace Method.hpp

Submitted by peter on Sat, 2010-10-23 09:40.

On Friday 22 October 2010 10:58:57 Peter Soetens wrote:
> On Friday 22 October 2010 10:46:24 Tinne De Laet wrote:
> > On Fri, Oct 22, 2010 at 10:44, Tinne De Laet
> >
> > <tinne [dot] delaet [..] ...> wrote:
> > > Hi,
> > >
> > > Just to report that after converting my components from 1.10 to 2.0
> > > the #include <rtt/Method.hp

is not replaced, causing a compile
> > > error.
>
> Which version are you using ? You should use the 1.2 version of the tool

Typo: 1.1 version, released on Oct 12.

Peter

»

conversion script does not replace Method.hpp

Submitted by peter on Sat, 2010-10-23 08:44.

On Friday 22 October 2010 10:58:57 Peter Soetens wrote:
> On Friday 22 October 2010 10:46:24 Tinne De Laet wrote:
> > On Fri, Oct 22, 2010 at 10:44, Tinne De Laet
> >
> > <tinne [dot] delaet [..] ...> wrote:
> > > Hi,
> > >
> > > Just to report that after converting my components from 1.10 to 2.0
> > > the #include <rtt/Method.hp

is not replaced, causing a compile
> > > error.
>
> Which version are you using ? You should use the 1.2 version of the tool

Typo: 1.1 version, released on Oct 12.

Peter

»

conversion script does not replace Method.hpp

Submitted by peter on Sat, 2010-10-23 07:52.

On Friday 22 October 2010 10:58:57 Peter Soetens wrote:
> On Friday 22 October 2010 10:46:24 Tinne De Laet wrote:
> > On Fri, Oct 22, 2010 at 10:44, Tinne De Laet
> >
> > <tinne [dot] delaet [..] ...> wrote:
> > > Hi,
> > >
> > > Just to report that after converting my components from 1.10 to 2.0
> > > the #include <rtt/Method.hp

is not replaced, causing a compile
> > > error.
>
> Which version are you using ? You should use the 1.2 version of the tool

Typo: 1.1 version, released on Oct 12.

Peter

»

conversion script does not replace Method.hpp

Submitted by peter on Sat, 2010-10-23 06:56.

On Friday 22 October 2010 10:58:57 Peter Soetens wrote:
> On Friday 22 October 2010 10:46:24 Tinne De Laet wrote:
> > On Fri, Oct 22, 2010 at 10:44, Tinne De Laet
> >
> > <tinne [dot] delaet [..] ...> wrote:
> > > Hi,
> > >
> > > Just to report that after converting my components from 1.10 to 2.0
> > > the #include <rtt/Method.hp

is not replaced, causing a compile
> > > error.
>
> Which version are you using ? You should use the 1.2 version of the tool

Typo: 1.1 version, released on Oct 12.

Peter

»

conversion script does not replace Method.hpp

Submitted by peter on Sat, 2010-10-23 06:00.

On Friday 22 October 2010 10:58:57 Peter Soetens wrote:
> On Friday 22 October 2010 10:46:24 Tinne De Laet wrote:
> > On Fri, Oct 22, 2010 at 10:44, Tinne De Laet
> >
> > <tinne [dot] delaet [..] ...> wrote:
> > > Hi,
> > >
> > > Just to report that after converting my components from 1.10 to 2.0
> > > the #include <rtt/Method.hp

is not replaced, causing a compile
> > > error.
>
> Which version are you using ? You should use the 1.2 version of the tool

Typo: 1.1 version, released on Oct 12.

Peter

»

conversion script does not replace Method.hpp

Submitted by peter on Sat, 2010-10-23 05:04.

On Friday 22 October 2010 10:58:57 Peter Soetens wrote:
> On Friday 22 October 2010 10:46:24 Tinne De Laet wrote:
> > On Fri, Oct 22, 2010 at 10:44, Tinne De Laet
> >
> > <tinne [dot] delaet [..] ...> wrote:
> > > Hi,
> > >
> > > Just to report that after converting my components from 1.10 to 2.0
> > > the #include <rtt/Method.hp

is not replaced, causing a compile
> > > error.
>
> Which version are you using ? You should use the 1.2 version of the tool

Typo: 1.1 version, released on Oct 12.

Peter

»

conversion script does not replace Method.hpp

Submitted by peter on Sat, 2010-10-23 04:08.

On Friday 22 October 2010 10:58:57 Peter Soetens wrote:
> On Friday 22 October 2010 10:46:24 Tinne De Laet wrote:
> > On Fri, Oct 22, 2010 at 10:44, Tinne De Laet
> >
> > <tinne [dot] delaet [..] ...> wrote:
> > > Hi,
> > >
> > > Just to report that after converting my components from 1.10 to 2.0
> > > the #include <rtt/Method.hp

is not replaced, causing a compile
> > > error.
>
> Which version are you using ? You should use the 1.2 version of the tool

Typo: 1.1 version, released on Oct 12.

Peter

»

conversion script does not replace Method.hpp

Submitted by peter on Sat, 2010-10-23 03:20.

On Friday 22 October 2010 10:58:57 Peter Soetens wrote:
> On Friday 22 October 2010 10:46:24 Tinne De Laet wrote:
> > On Fri, Oct 22, 2010 at 10:44, Tinne De Laet
> >
> > <tinne [dot] delaet [..] ...> wrote:
> > > Hi,
> > >
> > > Just to report that after converting my components from 1.10 to 2.0
> > > the #include <rtt/Method.hp

is not replaced, causing a compile
> > > error.
>
> Which version are you using ? You should use the 1.2 version of the tool

Typo: 1.1 version, released on Oct 12.

Peter

»

conversion script does not replace Method.hpp

Submitted by peter on Sat, 2010-10-23 02:28.

On Friday 22 October 2010 10:58:57 Peter Soetens wrote:
> On Friday 22 October 2010 10:46:24 Tinne De Laet wrote:
> > On Fri, Oct 22, 2010 at 10:44, Tinne De Laet
> >
> > <tinne [dot] delaet [..] ...> wrote:
> > > Hi,
> > >
> > > Just to report that after converting my components from 1.10 to 2.0
> > > the #include <rtt/Method.hp

is not replaced, causing a compile
> > > error.
>
> Which version are you using ? You should use the 1.2 version of the tool

Typo: 1.1 version, released on Oct 12.

Peter

»

conversion script does not replace Method.hpp

Submitted by peter on Sat, 2010-10-23 01:40.

On Friday 22 October 2010 10:58:57 Peter Soetens wrote:
> On Friday 22 October 2010 10:46:24 Tinne De Laet wrote:
> > On Fri, Oct 22, 2010 at 10:44, Tinne De Laet
> >
> > <tinne [dot] delaet [..] ...> wrote:
> > > Hi,
> > >
> > > Just to report that after converting my components from 1.10 to 2.0
> > > the #include <rtt/Method.hp

is not replaced, causing a compile
> > > error.
>
> Which version are you using ? You should use the 1.2 version of the tool

Typo: 1.1 version, released on Oct 12.

Peter

»

conversion script does not replace Method.hpp

Submitted by peter on Sat, 2010-10-23 00:48.

On Friday 22 October 2010 10:58:57 Peter Soetens wrote:
> On Friday 22 October 2010 10:46:24 Tinne De Laet wrote:
> > On Fri, Oct 22, 2010 at 10:44, Tinne De Laet
> >
> > <tinne [dot] delaet [..] ...> wrote:
> > > Hi,
> > >
> > > Just to report that after converting my components from 1.10 to 2.0
> > > the #include <rtt/Method.hp

is not replaced, causing a compile
> > > error.
>
> Which version are you using ? You should use the 1.2 version of the tool

Typo: 1.1 version, released on Oct 12.

Peter

»

conversion script does not replace Method.hpp

Submitted by peter on Fri, 2010-10-22 23:56.

On Friday 22 October 2010 10:58:57 Peter Soetens wrote:
> On Friday 22 October 2010 10:46:24 Tinne De Laet wrote:
> > On Fri, Oct 22, 2010 at 10:44, Tinne De Laet
> >
> > <tinne [dot] delaet [..] ...> wrote:
> > > Hi,
> > >
> > > Just to report that after converting my components from 1.10 to 2.0
> > > the #include <rtt/Method.hp

is not replaced, causing a compile
> > > error.
>
> Which version are you using ? You should use the 1.2 version of the tool

Typo: 1.1 version, released on Oct 12.

Peter

»

conversion script does not replace Method.hpp

Submitted by peter on Fri, 2010-10-22 23:08.

On Friday 22 October 2010 10:58:57 Peter Soetens wrote:
> On Friday 22 October 2010 10:46:24 Tinne De Laet wrote:
> > On Fri, Oct 22, 2010 at 10:44, Tinne De Laet
> >
> > <tinne [dot] delaet [..] ...> wrote:
> > > Hi,
> > >
> > > Just to report that after converting my components from 1.10 to 2.0
> > > the #include <rtt/Method.hp

is not replaced, causing a compile
> > > error.
>
> Which version are you using ? You should use the 1.2 version of the tool

Typo: 1.1 version, released on Oct 12.

Peter

»

conversion script does not replace Method.hpp

Submitted by peter on Fri, 2010-10-22 22:16.

On Friday 22 October 2010 10:58:57 Peter Soetens wrote:
> On Friday 22 October 2010 10:46:24 Tinne De Laet wrote:
> > On Fri, Oct 22, 2010 at 10:44, Tinne De Laet
> >
> > <tinne [dot] delaet [..] ...> wrote:
> > > Hi,
> > >
> > > Just to report that after converting my components from 1.10 to 2.0
> > > the #include <rtt/Method.hp

is not replaced, causing a compile
> > > error.
>
> Which version are you using ? You should use the 1.2 version of the tool

Typo: 1.1 version, released on Oct 12.

Peter

»